Hydraulic wood splitters

   Hydraulic wood splitters in Ukraine

Today, numerous machines and mechanisms have simplified the work of the population. They are used not only for industrial purposes, but also for private work. The wood splitter is a prime example. It simplifies the process of crushing logs into small firewood, which is subsequently suitable for kindling stoves, fireplaces, baths, saunas. The wood splitter has found its application on farms, in logging farms.

Among the large industrial enterprises that are engaged in the preparation of firewood, machines with hydraulic cylinders enjoy the greatest advantage. Their effort in household models is 3-4 tons. The force of the cylinder of professional machines is from 5 to 6 tons. Often there are machines with a cylinder force of 7 tons or more. The wood splitters split wood up to 50 cm in diameter.

Most hydraulic wood splitter with electric motor looks like this. The block is placed vertically on a work table or placed on a horizontal surface. A chute is arranged along the frame, which limits the fall of logs. A splitting wedge is fixedly fixed from one end of the bed, and from the other, a rod coming out of the hydraulic cylinder with a support heel welded perpendicular to it presses on the block.

The operator protection system on horizontal hydraulic breakers is implemented by operating the device with two hands. The forward movement of the rod occurs while simultaneously pressing the start button and the feed lever.

Splitting wood should be not only fast and of high quality, but also safe. In hydraulic wood splitting machines, the operator protection system is carried out by operating the device with two hands. The forward movement of the rod occurs while simultaneously pressing the start button and the feed lever. From the side of the workpiece, protective plates are put on the paws of the lateral grip, and rubber damping rings are fixed to them. They absorb impact when splitting. Serrated plates securely fix the block.

In hydraulic wood splitters, the frames are positioned vertically and horizontally. An important role is played by a dividing knife, which is in contact with the log. It must have the correct geometry and a bevel angle of 40 ° –60 °. It is made of steel X12MF, 40X13 with a hardness of 45-60 HRC. The wedge-shaped knife enters the wood without impact, parallel to the grain, tearing them with the side surfaces of the blade and splitting them apart as it advances.

With proper care and safety, the tool has a long service life without breakage and failure. Hydraulic models can be bought inexpensively, so the price and advantages of these models prevail over other types. For example, the developer's attention was paid to the following points:

• The start button is installed horizontally, which is much more convenient than the side. Pressing with your finger from above is easier than pressing from the side.
• Dismountable frame, removable or adjustable wheels and handle facilitate transportation.
• The wide base cross member prevents the unit from sinking into soft soil.
• Applying a polymer anti-friction compound to rubbing surfaces will reduce noise and reduce friction.

You can buy an inexpensive wood splitter in Ukraine on our Motolux website. A model from the Czech manufacturer Vari with a mobile installation type is presented to our attention. Its electric motor principle carries out the work of splitting logs with a maximum material diameter of 55 cm in a vertical working position. In this case, the mains voltage must be at least 220-230 V. A discount is provided and there is an opportunity to buy an inexpensive high-quality product. The manager will advise on any question about the product and the price.

The store accepts payment through bank transfer, replenishment of the Visa card through the cash desk of Privatbank or Privat24, cash on delivery through "New mail". Delivery - by courier in the Transcarpathian region (free of charge) within 48 hours, by "New mail" (both by prepayment and by payment upon receipt) - 2-7 days, "In-time" with 10% prepayment - 2-7 days, to other countries by agreement.